Safety Data Sheet

According to Safe Work Australia. Printing date 18.07.2014. Revision: 18.07.2014 (38.0.35)

Identification: Product Identifier and Chemical Identity

Product Name: OZI MAGIC GRO JUICE Other Name: Monsta Bud, Ozi Tonic, Recommended Use of the Chemical and Restriction on Use: Plant food. All purpose fertiliser.
Details of Manufacturer or Importer: Hydrapsher Technologies Pty Ltd, 333 Cox River Road, Little Hartley NSW 2790
Phone Number: (02) 6355 2399 / 0409 046 804 | Emergency telephone number: (02) 6355 2399

Hazards Identification

Hazardous Nature: The product is not classified according to the Globally Harmonised System (GHS). Label Elements | Signal Word Void | Hazard Statements Void

Composition and Information on Ingredients

Chemical Characterisation: Mixtures Description: No reportable hazardous substances or complex substances.
Hazardous Components: Void Additional information: Product includes Water, Potassium Nitrate (Pn), Iron Fe Low (Fe), Calcium (Ca), Mono Ammonia Phosphate (MAP), Mono Potassium Phosphate (MKP), Magnesium Sulphate (MGS), Manganese Chelate (Mn), Borax (B), Zinc Chelate (Zn), Copper Chelate (Cu), Molybdate (Mo), Selenium (Se), Cobalt (Co), Nickel (Ni), Cadmium (Cd), Mercury (Hg), Arsenic (As) and Lead (Pb).

First Aid Measures

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention if breathing problems develop.
Skin Contact: In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. Seek medical attention if symptoms occur.
Eye Contact: In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention.
Ingestion: If swallowed, rinse mouth with water and give a glass of water to drink. If vomiting occurs give further water. Do not give anything by mouth to an unconscious person. Seek immediate medical attention.

Accidental Release Measures

Personal Precautions, Protective Equipment and Emergency Procedures: Wear Safe Work Australia approved self-contained breathing apparatus, solvent resistant gloves, protective clothing, apron and boots. Evacuate all non-essential personnel from affected area. Do not breathe vapours. Ensure adequate ventilation.
Environmental Precautions: In the event of a major spill, prevent spillage from entering drains or water courses.
Methods and Materials for Containment and Cleaning Up: Stop leak if safe to do so and absorb spill with sand, earth, vermiculite or some other absorbent material. Collect the spilled material and place into a suitable container for disposal.

Handling and Storage

Precautions for Safe Handling: Use of safe work practices are recommended to avoid eye or skin contact and inhalation of vapours. Ensure adequate natural ventilation. Food, beverages and tobacco products should not be stored or consumed where this material is in use. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure.
Conditions for Safe Storage: Store in a cool, dry and well ventilated area out of direct sunlight. Keep container tightly closed when not in use, check regularly for leaks.

Exposure Controls and Personal Protection

Exposure Standards: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Engineering Controls: Natural ventilation should be adequate under normal use conditions. Personal Protective Equipment (PPE): Respiratory Protection: Respiratory protection is not required under normal use conditions.
Skin Protection: Rubber gloves are recommended. See Australian/New Zealand Standard AS/NZS 2161 for more information. When selecting gloves for use against certain chemicals, the degradation resistance, permeation rate and permeation breakthrough time should be considered. Occupational protective clothing (depending on conditions in which it has to be used, in particular as regards the period for which it is worn, which shall be determined on the basis of the seriousness of the risk, the frequency of exposure to the risk, the characteristics of the workstation of each worker and the performance of the protective clothing). See Australian/New Zealand Standard AS/NZS 4501 for more information. Eye and Face Protection: Eye protection is not required under normal use conditions.